24
фев
K 22 Masterpiece Serial Numbers Rating: 5,5/10 8904 reviews
Contents. History Smith & Wesson's Models 16 and 17 have their origins with the company's Pre-World War 2 Hand Ejector series in the 1930s. These two revolver models debuted as companion pieces known as the Models K-32 and K-22 after World War 2. The K-32 Masterpiece (Model 16) debuted in 1935 and was chambered in caliber. Production ceased during World War 2 and the revolver was reintroduced in 1947 along with the K-22 Masterpiece (Model 17) in caliber.
Description: Serial #K236840,.22 LR, 6” barrel with an excellent, bright bore. This is a handsome revolver that has matching numbers on the frame, barrel, yoke,. J geils band discography rar. Dec 2, 2017 - Manufactured in 1940, this is one of only 1,067 pre-war K-22 Masterpieces manufactured. It has standard S&W markings, importer marking on butt, micrometer click rear sight, short action, un-numbered medallion Magna grips and matching serial numbers on butt, cylinder and barrel.
The Model 16 was dropped from production in 1983 due to the declining popularity of the caliber and the Model 17 was discontinued in 1998 as the company focused less on blued steel revolvers at the time. Design The Model 17 has an adjustable rear sight and an un-pinned, fixed ramp or Patridge style front sight.
It was designed as a target revolver and could be ordered from S&W with 'The Three T's': Target Trigger, Target Hammer and Target Grips. Standard barrel lengths were 4', 6' and 8 3/8'.
The 4' model 17-6 is infrequently seen, as S&W produced the almost identical, 4' barrelled, Model 18. The Model 18 was a Model 17 copy- except the 4' barrel was tapered where the Model 17 4' barrel was not. Many collectors believe the Model 17-6 with the 4' non-tapered barrel was a bit of a production oddity, most probably put together from 6' and 8 3/8' barrels that were cut down to 4' at the factory. In 1990, S&W also shipped the Model 17 featuring a 4', 6' or 8 3/8' full under lug barrel.
The 'under lug' was a solid, blued steel, circular rod, cast as part of the barrel, and running under the barrel from the front of the cylinder yoke to the muzzle's end. The under lug not only enclosed the ejector rod, it also added considerable weight to the gun itself. The under lug model shipped with a special round butt wood grip that featured inletted finger grooves. The 4' Model 17 Under Lug is infrequently seen and quite possibly manufactured as an afterthought using factory shortened 6' or 8 3/8' under lug barrels. Derivatives Model 18 & 617 The Smith & Wesson Model 18 (or the 22 Combat Masterpiece) was built on S&W's 'K' Frame, (Smith & Wesson's designation for 'medium frame' firearms.) It was a tapered, 4-inch-barreled, with adjustable open, chambered for the Many believe the Model 18 was designed as a training weapon for law enforcement officials and others who primarily carried Model 10's, 15's and 19's- and.357 caliber revolvers. The Model 18 (like the Model 17) operates and handles in a similar fashion to these law enforcement models of the day; and closely shares the size, weight, grips, internal mechanism, and operation of several popular 'K' framed revolvers like the Model 10 (.38 Cal.), Model 13 (.38 &.357 Cal.), Model 14 (.38 Cal.), Model 15 (.38 Cal.) and Model 19 (.38 &.357 Cal.) The only significant difference was the Model 18's.22 caliber.
Model 617 - At the same time S&W introduced the Model 17 full Under Lug, (discontinued in 1998) they also began production of the.22 caliber Model 617. This is the stainless steel version of the blued steel Model 17.22 LR, however all Model 617's have full, Under Lug barrels. Offered in the same three barrel lengths as the Model 17, the 617 is still in current production and is shipped with rubber grips. The Model 617 is found with a six-shot or ten-shot, steel.22 LR cylinder. The only exception is the early production Model 617-2 which was made with a ten-shot, aluminium alloy.22 LR cylinder. Later 'dash 2' 617's were shipped with stainless steel cylinders. Model 53 Photograph of Model 53 with cylinder inserts.
The Smith & Wesson Model 53 was introduced in 1961 in the.22 Jet caliber. It is a revolver of six round capacity built on the small K frame using a double action trigger. The.22 Jet cartridge had a listed velocity of 2460 fps using a 40 grain bullet, but actually reached 1700-1800 this in the revolver.
The Model 53 can also fire the.22 Short, Long, and Long rifle cartridges using chamber inserts. The hammer had a two position firing pin to allow it to be switched from rimfire to centerfire as needed. The handgun came with target handgrips and sights and in barrel lengths of 4, 6 and 8.3 inches. In the late 1950s there was considerable interest in the shooting community for revolvers chambered in various.22 caliber wildcat cartridges. Smith & Wesson sought to take advantage of this by unveiling a cartridge known as the (Centerfire Magnum) cartridge or the and chambered a version of the Model 17 in this caliber designating it the Model 53. The Model 53 was manufactured from 1960 to 1974.
Problems in Use Due to the tapered design of the.22 Jet cartridge there were problem with case setback. It was advised that the cylinders and cartridges be kept absolutely dry to prevent this.
Note: lubricating cartridges results in a pressure increase. Cartridges should always be dry. Present State The Model 17 was discontinued in 1998, but in 2009 was reintroduced as the Model 17 'Masterpiece' due to a resurgence in the popularity of vintage Smith & Wesson revolvers. The company chose approx. Fifteen previously discontinued models to produce once again.
This was done under the 'Classics' category of S&W's current offerings. See also. References. ^ Shideler, Dan (2009).
Iola, Wisconsin: Gun Digest Books. Supica, Jim; Nahas, Richard (3 January 2007). Iola, Wisconsin: F+W Media, Inc. House, James E. Iola, Wisconsin: Gun Digest Books. Barnes, Fred C (2014).
Cartridges of the World (14 ed.). Iola, WI, USA: Krause Publications. Smith, W.H.B (1968).
The Book of Pistols and Revolvers (7th ed.). Harrisburg, PA, USA: Stackpole Company. ^ Mann, Richard Allen; Lee, Jerry (2013). Iola, Wisconsin: Krause Publications. External links. (?).
1947 Hello Kevin Here's one that Left the factory on July 1947. It has the larger style Mushroom shaped extractor rod. They used this style extractor to exhaust the Prewar supply of them, having to Mill out the bottom of the barrel to allow the closing of the cylinder. It is considered a Transitional K-22 and it's serial is a low Four digit sequence.The Smaller style Magna stock's shown in the last Two Picture's are serial numbered to it being original when it left the factory in 1947. The 'Standard Catalog of Smith and Wesson' has some S/N info but it's not absolutely exhaustive.
On the older stuff it's pretty good. AFAIK, there is no good source on the web.
Hello Savage 24 This should help. Post-War K-FrameSerial Numbers List.
1947 Hello Kevin Here's one that Left the factory on July 1947. It has the larger style Mushroom shaped extractor rod.
They used this style extractor to exhaust the Prewar supply of them, having to Mill out the bottom of the barrel to allow the closing of the cylinder. It is considered a Transitional K-22 and it's serial is a low Four digit sequence.The Smaller style Magna stock's shown in the last Two Picture's are serial numbered to it being original when it left the factory in 1947. General, you always treat us with such beautiful guns. I'd rather shoot a K-22 over any other handgun, I love them that much.
04/15/11 Re: S&W K-22 date of manufacture Joined: Jun 2005 Posts: 1,567 Campfire Ranger Campfire Ranger Joined: Jun 2005 Posts: 1,567.
Contents. History Smith & Wesson's Models 16 and 17 have their origins with the company's Pre-World War 2 Hand Ejector series in the 1930s. These two revolver models debuted as companion pieces known as the Models K-32 and K-22 after World War 2. The K-32 Masterpiece (Model 16) debuted in 1935 and was chambered in caliber. Production ceased during World War 2 and the revolver was reintroduced in 1947 along with the K-22 Masterpiece (Model 17) in caliber.
Description: Serial #K236840,.22 LR, 6” barrel with an excellent, bright bore. This is a handsome revolver that has matching numbers on the frame, barrel, yoke,. J geils band discography rar. Dec 2, 2017 - Manufactured in 1940, this is one of only 1,067 pre-war K-22 Masterpieces manufactured. It has standard S&W markings, importer marking on butt, micrometer click rear sight, short action, un-numbered medallion Magna grips and matching serial numbers on butt, cylinder and barrel.
The Model 16 was dropped from production in 1983 due to the declining popularity of the caliber and the Model 17 was discontinued in 1998 as the company focused less on blued steel revolvers at the time. Design The Model 17 has an adjustable rear sight and an un-pinned, fixed ramp or Patridge style front sight.
It was designed as a target revolver and could be ordered from S&W with 'The Three T's': Target Trigger, Target Hammer and Target Grips. Standard barrel lengths were 4', 6' and 8 3/8'.
The 4' model 17-6 is infrequently seen, as S&W produced the almost identical, 4' barrelled, Model 18. The Model 18 was a Model 17 copy- except the 4' barrel was tapered where the Model 17 4' barrel was not. Many collectors believe the Model 17-6 with the 4' non-tapered barrel was a bit of a production oddity, most probably put together from 6' and 8 3/8' barrels that were cut down to 4' at the factory. In 1990, S&W also shipped the Model 17 featuring a 4', 6' or 8 3/8' full under lug barrel.
The 'under lug' was a solid, blued steel, circular rod, cast as part of the barrel, and running under the barrel from the front of the cylinder yoke to the muzzle's end. The under lug not only enclosed the ejector rod, it also added considerable weight to the gun itself. The under lug model shipped with a special round butt wood grip that featured inletted finger grooves. The 4' Model 17 Under Lug is infrequently seen and quite possibly manufactured as an afterthought using factory shortened 6' or 8 3/8' under lug barrels. Derivatives Model 18 & 617 The Smith & Wesson Model 18 (or the 22 Combat Masterpiece) was built on S&W's 'K' Frame, (Smith & Wesson's designation for 'medium frame' firearms.) It was a tapered, 4-inch-barreled, with adjustable open, chambered for the Many believe the Model 18 was designed as a training weapon for law enforcement officials and others who primarily carried Model 10's, 15's and 19's- and.357 caliber revolvers. The Model 18 (like the Model 17) operates and handles in a similar fashion to these law enforcement models of the day; and closely shares the size, weight, grips, internal mechanism, and operation of several popular 'K' framed revolvers like the Model 10 (.38 Cal.), Model 13 (.38 &.357 Cal.), Model 14 (.38 Cal.), Model 15 (.38 Cal.) and Model 19 (.38 &.357 Cal.) The only significant difference was the Model 18's.22 caliber.
Model 617 - At the same time S&W introduced the Model 17 full Under Lug, (discontinued in 1998) they also began production of the.22 caliber Model 617. This is the stainless steel version of the blued steel Model 17.22 LR, however all Model 617's have full, Under Lug barrels. Offered in the same three barrel lengths as the Model 17, the 617 is still in current production and is shipped with rubber grips. The Model 617 is found with a six-shot or ten-shot, steel.22 LR cylinder. The only exception is the early production Model 617-2 which was made with a ten-shot, aluminium alloy.22 LR cylinder. Later 'dash 2' 617's were shipped with stainless steel cylinders. Model 53 Photograph of Model 53 with cylinder inserts.
The Smith & Wesson Model 53 was introduced in 1961 in the.22 Jet caliber. It is a revolver of six round capacity built on the small K frame using a double action trigger. The.22 Jet cartridge had a listed velocity of 2460 fps using a 40 grain bullet, but actually reached 1700-1800 this in the revolver.
The Model 53 can also fire the.22 Short, Long, and Long rifle cartridges using chamber inserts. The hammer had a two position firing pin to allow it to be switched from rimfire to centerfire as needed. The handgun came with target handgrips and sights and in barrel lengths of 4, 6 and 8.3 inches. In the late 1950s there was considerable interest in the shooting community for revolvers chambered in various.22 caliber wildcat cartridges. Smith & Wesson sought to take advantage of this by unveiling a cartridge known as the (Centerfire Magnum) cartridge or the and chambered a version of the Model 17 in this caliber designating it the Model 53. The Model 53 was manufactured from 1960 to 1974.
Problems in Use Due to the tapered design of the.22 Jet cartridge there were problem with case setback. It was advised that the cylinders and cartridges be kept absolutely dry to prevent this.
Note: lubricating cartridges results in a pressure increase. Cartridges should always be dry. Present State The Model 17 was discontinued in 1998, but in 2009 was reintroduced as the Model 17 'Masterpiece' due to a resurgence in the popularity of vintage Smith & Wesson revolvers. The company chose approx. Fifteen previously discontinued models to produce once again.
This was done under the 'Classics' category of S&W's current offerings. See also. References. ^ Shideler, Dan (2009).
Iola, Wisconsin: Gun Digest Books. Supica, Jim; Nahas, Richard (3 January 2007). Iola, Wisconsin: F+W Media, Inc. House, James E. Iola, Wisconsin: Gun Digest Books. Barnes, Fred C (2014).
Cartridges of the World (14 ed.). Iola, WI, USA: Krause Publications. Smith, W.H.B (1968).
The Book of Pistols and Revolvers (7th ed.). Harrisburg, PA, USA: Stackpole Company. ^ Mann, Richard Allen; Lee, Jerry (2013). Iola, Wisconsin: Krause Publications. External links. (?).
1947 Hello Kevin Here's one that Left the factory on July 1947. It has the larger style Mushroom shaped extractor rod. They used this style extractor to exhaust the Prewar supply of them, having to Mill out the bottom of the barrel to allow the closing of the cylinder. It is considered a Transitional K-22 and it's serial is a low Four digit sequence.The Smaller style Magna stock's shown in the last Two Picture's are serial numbered to it being original when it left the factory in 1947. The 'Standard Catalog of Smith and Wesson' has some S/N info but it's not absolutely exhaustive.
On the older stuff it's pretty good. AFAIK, there is no good source on the web.
Hello Savage 24 This should help. Post-War K-FrameSerial Numbers List.
1947 Hello Kevin Here's one that Left the factory on July 1947. It has the larger style Mushroom shaped extractor rod.
They used this style extractor to exhaust the Prewar supply of them, having to Mill out the bottom of the barrel to allow the closing of the cylinder. It is considered a Transitional K-22 and it's serial is a low Four digit sequence.The Smaller style Magna stock's shown in the last Two Picture's are serial numbered to it being original when it left the factory in 1947. General, you always treat us with such beautiful guns. I'd rather shoot a K-22 over any other handgun, I love them that much.
04/15/11 Re: S&W K-22 date of manufacture Joined: Jun 2005 Posts: 1,567 Campfire Ranger Campfire Ranger Joined: Jun 2005 Posts: 1,567.
...">K 22 Masterpiece Serial Numbers(24.02.2020)Contents. History Smith & Wesson's Models 16 and 17 have their origins with the company's Pre-World War 2 Hand Ejector series in the 1930s. These two revolver models debuted as companion pieces known as the Models K-32 and K-22 after World War 2. The K-32 Masterpiece (Model 16) debuted in 1935 and was chambered in caliber. Production ceased during World War 2 and the revolver was reintroduced in 1947 along with the K-22 Masterpiece (Model 17) in caliber.
Description: Serial #K236840,.22 LR, 6” barrel with an excellent, bright bore. This is a handsome revolver that has matching numbers on the frame, barrel, yoke,. J geils band discography rar. Dec 2, 2017 - Manufactured in 1940, this is one of only 1,067 pre-war K-22 Masterpieces manufactured. It has standard S&W markings, importer marking on butt, micrometer click rear sight, short action, un-numbered medallion Magna grips and matching serial numbers on butt, cylinder and barrel.
The Model 16 was dropped from production in 1983 due to the declining popularity of the caliber and the Model 17 was discontinued in 1998 as the company focused less on blued steel revolvers at the time. Design The Model 17 has an adjustable rear sight and an un-pinned, fixed ramp or Patridge style front sight.
It was designed as a target revolver and could be ordered from S&W with 'The Three T's': Target Trigger, Target Hammer and Target Grips. Standard barrel lengths were 4', 6' and 8 3/8'.
The 4' model 17-6 is infrequently seen, as S&W produced the almost identical, 4' barrelled, Model 18. The Model 18 was a Model 17 copy- except the 4' barrel was tapered where the Model 17 4' barrel was not. Many collectors believe the Model 17-6 with the 4' non-tapered barrel was a bit of a production oddity, most probably put together from 6' and 8 3/8' barrels that were cut down to 4' at the factory. In 1990, S&W also shipped the Model 17 featuring a 4', 6' or 8 3/8' full under lug barrel.
The 'under lug' was a solid, blued steel, circular rod, cast as part of the barrel, and running under the barrel from the front of the cylinder yoke to the muzzle's end. The under lug not only enclosed the ejector rod, it also added considerable weight to the gun itself. The under lug model shipped with a special round butt wood grip that featured inletted finger grooves. The 4' Model 17 Under Lug is infrequently seen and quite possibly manufactured as an afterthought using factory shortened 6' or 8 3/8' under lug barrels. Derivatives Model 18 & 617 The Smith & Wesson Model 18 (or the 22 Combat Masterpiece) was built on S&W's 'K' Frame, (Smith & Wesson's designation for 'medium frame' firearms.) It was a tapered, 4-inch-barreled, with adjustable open, chambered for the Many believe the Model 18 was designed as a training weapon for law enforcement officials and others who primarily carried Model 10's, 15's and 19's- and.357 caliber revolvers. The Model 18 (like the Model 17) operates and handles in a similar fashion to these law enforcement models of the day; and closely shares the size, weight, grips, internal mechanism, and operation of several popular 'K' framed revolvers like the Model 10 (.38 Cal.), Model 13 (.38 &.357 Cal.), Model 14 (.38 Cal.), Model 15 (.38 Cal.) and Model 19 (.38 &.357 Cal.) The only significant difference was the Model 18's.22 caliber.
Model 617 - At the same time S&W introduced the Model 17 full Under Lug, (discontinued in 1998) they also began production of the.22 caliber Model 617. This is the stainless steel version of the blued steel Model 17.22 LR, however all Model 617's have full, Under Lug barrels. Offered in the same three barrel lengths as the Model 17, the 617 is still in current production and is shipped with rubber grips. The Model 617 is found with a six-shot or ten-shot, steel.22 LR cylinder. The only exception is the early production Model 617-2 which was made with a ten-shot, aluminium alloy.22 LR cylinder. Later 'dash 2' 617's were shipped with stainless steel cylinders. Model 53 Photograph of Model 53 with cylinder inserts.
The Smith & Wesson Model 53 was introduced in 1961 in the.22 Jet caliber. It is a revolver of six round capacity built on the small K frame using a double action trigger. The.22 Jet cartridge had a listed velocity of 2460 fps using a 40 grain bullet, but actually reached 1700-1800 this in the revolver.
The Model 53 can also fire the.22 Short, Long, and Long rifle cartridges using chamber inserts. The hammer had a two position firing pin to allow it to be switched from rimfire to centerfire as needed. The handgun came with target handgrips and sights and in barrel lengths of 4, 6 and 8.3 inches. In the late 1950s there was considerable interest in the shooting community for revolvers chambered in various.22 caliber wildcat cartridges. Smith & Wesson sought to take advantage of this by unveiling a cartridge known as the (Centerfire Magnum) cartridge or the and chambered a version of the Model 17 in this caliber designating it the Model 53. The Model 53 was manufactured from 1960 to 1974.
Problems in Use Due to the tapered design of the.22 Jet cartridge there were problem with case setback. It was advised that the cylinders and cartridges be kept absolutely dry to prevent this.
Note: lubricating cartridges results in a pressure increase. Cartridges should always be dry. Present State The Model 17 was discontinued in 1998, but in 2009 was reintroduced as the Model 17 'Masterpiece' due to a resurgence in the popularity of vintage Smith & Wesson revolvers. The company chose approx. Fifteen previously discontinued models to produce once again.
This was done under the 'Classics' category of S&W's current offerings. See also. References. ^ Shideler, Dan (2009).
Iola, Wisconsin: Gun Digest Books. Supica, Jim; Nahas, Richard (3 January 2007). Iola, Wisconsin: F+W Media, Inc. House, James E. Iola, Wisconsin: Gun Digest Books. Barnes, Fred C (2014).
Cartridges of the World (14 ed.). Iola, WI, USA: Krause Publications. Smith, W.H.B (1968).
The Book of Pistols and Revolvers (7th ed.). Harrisburg, PA, USA: Stackpole Company. ^ Mann, Richard Allen; Lee, Jerry (2013). Iola, Wisconsin: Krause Publications. External links. (?).
1947 Hello Kevin Here's one that Left the factory on July 1947. It has the larger style Mushroom shaped extractor rod. They used this style extractor to exhaust the Prewar supply of them, having to Mill out the bottom of the barrel to allow the closing of the cylinder. It is considered a Transitional K-22 and it's serial is a low Four digit sequence.The Smaller style Magna stock's shown in the last Two Picture's are serial numbered to it being original when it left the factory in 1947. The 'Standard Catalog of Smith and Wesson' has some S/N info but it's not absolutely exhaustive.
On the older stuff it's pretty good. AFAIK, there is no good source on the web.
Hello Savage 24 This should help. Post-War K-FrameSerial Numbers List.
1947 Hello Kevin Here's one that Left the factory on July 1947. It has the larger style Mushroom shaped extractor rod.
They used this style extractor to exhaust the Prewar supply of them, having to Mill out the bottom of the barrel to allow the closing of the cylinder. It is considered a Transitional K-22 and it's serial is a low Four digit sequence.The Smaller style Magna stock's shown in the last Two Picture's are serial numbered to it being original when it left the factory in 1947. General, you always treat us with such beautiful guns. I'd rather shoot a K-22 over any other handgun, I love them that much.
04/15/11 Re: S&W K-22 date of manufacture Joined: Jun 2005 Posts: 1,567 Campfire Ranger Campfire Ranger Joined: Jun 2005 Posts: 1,567.
...">K 22 Masterpiece Serial Numbers(24.02.2020)Latest Pages
© 2020 K 22 Masterpiece Serial Numbers.